DD26 HYDRAULIC STEERING LOCK CLIPS GEN 2
Description
Our design allows fitment for hydraulic steering systems with 3.75" and/or 4" of exposed steering rod on each side of the engine and will allow fitment with steering rods with diameters of 16mm, 3/4", 20mm and 7/8".
The way this system works is that the standard steering locks you purchased will come with the 3/4" clips attached already. Those clips result in a 4" width. Should you have a hydraulic steering system that has a different width or diameter, you simply can purchase the proper clips for your set up and switch them out at your convenience. Additional clips come in the following set ups:
- 16mm diameter providing total unit width of 3.75" Baystar
- 18mm diameter providing total unit width of 4.125" Vevor
- 3/4" diameter providing total unit width of 4" Seastar Pro (MOST COMMON AND OUR STEERING LOCKS ALREADY COME WITH THESE ASSEMBLED ON THEM!)
- 20mm diameter providing total unit width of 3.75" Uflex
- 7/8" diameter providing total unit width of 4" Seastar Extra Heavy (usually 300hp and up)
- 3/4" diameter providing total unit width of 5" OLD OLD Seastar (very rare, measure first)
Each of these kits comes with 4 steering lock clips.
Fitment of a hydraulic steering lock has NOTHING to do with the ENGINE itself. So if you have a Mercury Engine it has nothing to do with the steering system. Its all about which hydraulic steering system you have.
A good guide of common fitment is: (but recommended to measure first)
- Seastar steering systems - Usually 4" steering locks 3/4" Diameter (most common) (These clips come standard with the DD26 Gen 2 Mean Stops)
- Seastar extra heavy tournament - Usually 4" steering locks with 7/8" diameter
- Very Old Seastar - Usually 5" steering locks with 3/4" diameter
- Baystar steering systems - Usually 3.75" steering locks with 16mm Diameter
- Mercury steering systems - Usually 3.75" steering locks with 20mm Diameter
- Uflex steering systems - Usually 3.75" steering locks with 20mm Diameter Measure first
- Vevor steering system - Usually 4.125" steering locks with 18mm Diameter
These second generation clips do not fit first generation mean stops!
⚠️ WARNING:
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
www.P65Warnings.ca.gov
www.P65Warnings.ca.gov
16mm with 3.75" width
| Price | Stock | Quantity |
|---|---|---|
| $9.99 | 10+ |
|
Max stock limit reached
20mm with 3.75" width
| Price | Stock | Quantity |
|---|---|---|
| $9.99 | 10+ |
|
Max stock limit reached
7/8" with 4" width
| Price | Stock | Quantity |
|---|---|---|
| $9.99 | 10+ |
|
Max stock limit reached
3/4" with 4" width
| Price | Stock | Quantity |
|---|---|---|
| $9.99 | 10+ |
|
Max stock limit reached
5" Wide
| Price | Stock | Quantity |
|---|---|---|
| $9.99 | 10+ |
|
Max stock limit reached
18mm with 4.125" width (Vevor)
| Price | Stock | Quantity |
|---|---|---|
| $9.99 | 10+ |
|
Max stock limit reached
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor